suitable for cutting Copper,
Aluminium or telephone cables.
65 (2-9/16)
700 (10,000)
511 x 105 x 313 (20.1 x 4.1 x 12.3)
14.4
AGIP ARNICA 32 or SHELL TELLUS TX 32 or equivalent.
the tool has a twin speed operation and automatically
switches from a rapid advancing speed of the ram
to a slower, more powerful cutting speed.
the tool is equipped with a maximum pressure valve.
-15°C to +40°C (+5°F to +104°F)
3
36
BATTERY OPERATED HYDRAULIC CUTTING TOOL
B-TC065-SC ; B-TC065-SCA
1. GENERAL CHARACTERISTICS
This hydraulic tool is powered by a
14.4 V
battery.
The residual battery capacity level is automatically displayed after every cycle.
ENGLISH
B-TC065-SC
B-TC065-SCA
Application range:
Max. cutting diameter
mm (inches):
Rated operating pressure
bar (psi):
Dimensions
LxWxH
mm (inches):
Weight with battery
kg (lbs):
Motor
Volt DC:
Battery
Volt / Ah:
Battery charger supply
Volt / Hz:
Recommended oil:
Operating speed:
Safety:
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
pA
is equal to .................................................................................75 dB (A)
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
pCPeak
is ..................................................................... < 130 dB (C)
– The acoustic power level emitted by the machine
L
WA
is equal to .............................................................................................................85,3 dB (A)
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1
st
Standards, and under operating conditions much more severe than those normally found,
certify that
the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
2
.
TOOL TYPE:
NOTE
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
120 / 50 - 60
220 - 240 / 50 - 60
14.4 / 3.0 Li-Ion
14.4 / 3.0 Ni-MH
7,5 (16.5)
7,2 (15.8)
FIG. 3
METAL CASE
COFFRET METALLIQUE
METALLKASSETTE
ESTUCHE METÁLICO
CASSETTA METALLICA
