Cebora ef4-ss, Instruction Manual

Page: 27 / 47

27
Fig. 14
d3
l13
l14
l15
t5 t6 t7 t8 t9
t11
t12
t10
t13
l10 l11 l12
Immediately after it shows the values preset by the weld-
ing machine manufacturer:
- date (day/month/year)
and time (hour and min
utes).
- synergic mig Process .
(led
L10
on).
- Welding wire type SG2 ø
1.0 mm.
- gas ar/18% co2.
- 2 stages start-up mode
2t.
The lower portion of the display shows (MEM, PAR, 2T/4T
and JoB) that can be selected by means of the function
keys
T6, T7, T8, T9
(see par. 8).
6.3 ALARM DISPLAY
When the machine detects a temporary alarm, displays
D1
and
D2
show a fl ashing wording related to the alarm
cause. For example: if the wire feeder door is opened,
the wording “ OPn ”
6.4 ERROR DISPLAY
When the machine detects a serious alarm, displays D1
and D2 show a wording “ Err ” followed by the relevant
error code.
In this case, switch off the machine and contact technical
service (see par. 10)
.
7 MAChINE PROgRAMMINg
“Main Menu” -
T5 T6 T7
T8
T9 L10 L11 L12
L13
L14
L15
T13
T11
T10
T12
Programming is made in the “Main Menu” . to access,
press key T5 and then key T6 (MENU) or through the
quick access menu described under paragraph 8.
in the “ Main Menu “ , via keys
T10
and
T11
, it is possible
to select one of the list items highlighted by the yellow
band. With key T12 enter the submenu, while with key
T13 return to the previous menu and save, at the same
time, the selection made.
A downward arrow indicates that there are additional
items not shown on the screen.
This surfi ng mode applies to all machine menus.
the available items in the “main menu “ are:
- “Process Parameters” (see par. 7.1)
- “ Jobs” (see par. 7.2)
- “Settings” - (see par. 7.3)
-
“Information”
(see par. 7.4)