Cebora ef4-ss, Instruction Manual

Page: 23 / 47

23
I - Quick-fitting valves :
The hoses coming off the water cooled torch must be
connected to the quick-fitting valves. NB Match the hose
and valve colors correctly. Only on machines with sepa -
rate wire feeder
L - Support :
Welding torch support.
M - Panel :
cooling unit compartment cover.
N – gas hose
.
O - Gas hose fitting :
this is where the gas hose from the power source/trolley
connection is to be connected.
P- Connector :
this is where the service cable connector of the power
source/trolley connection is to be connected.
Q - Pressure switch socket :
it receives the cable from the pressure switch located in -
side the cooling unit (art. 1683).
R – fuse holder.
S – Socket :
it receives the cooling unit power cord Art. 1683 (optional).
T - ON/Off switch.
U - Power cable .
V – Cylinder locking straps.
W – Cylinder support.
Z - Quick-fitting valves
:
The red and blue hoses coming off the power source/trol -
ley connection must be connected to these quick-fitting
valves. Only on machines with separate wire feeder.
NOTE: The valves are located under the wire feeder trolley
.match the hose and the valve colors correctly.
X – Socket :
In MIG/MAG welding, this is where the power source ca -
ble (+ pole) fast-on connector of the power source/trolley
connection is to be connected. Only on machines with
separate wire feeder.
Y - fitting
:
this is where the gas hose from the power source/wire
feeder extension connection is to be connected. only on
machines with separate wire feeder.
K - Plug
:
this is where the power cable fast-on connector of the
power source/wire feeder trolley connection is to be con -
nected. Only on machines with separate wire feeder.
g
e
F
m
B
a
d
q
r
h
n
t
v
s
u
W
v
Fig. 10
l