Cebora ef4-ss, Instruction Manual

Page: 21 / 47

21
Fig. 3
3.3 EXTENSIONS CONNECTION
• Block one end of connection bA , by fixing the tip bb to
the bottom of the machine as shown in fig. 4.
Fig. 4
Ba
BB
• Connect all wiring on the back of the power source, as
shown in fig. 5.
Fig. 5
• Avoid coiling the connection to reduce to a minimum
the inductive effects that could affect welding results.
• Connect the other end of connection BA to the wire
feeder trolley as shown in fig. 6.
Fig. 6
• The coolant fluid hoses must be connected to the
quick-fitting valves located below the lower part of the
wire feeder trolley (see fig. 7), by matching the colours
appearing on the trolley front side.
Fig. 7