67
ADVANCED SETUP Menu
“DH” CONTROL PANEL
MENU K
EY
ENTER/MEM K
EY
ENCODER K
NOB
- SX
ENCODER K
NOB
- DX
VISION S
CREEN
SX K
EY
DX K
EY
SETUP
To access the
ADVANCED SETUP Menu
from any point on the control panel:
• Open the
SETUP Menu
by holding the
SX K
EY
down for at least
5
consecutive seconds.
• Open the
CONFIG Menu
by rotating the
ENCODER K
NOB
- SX
until the icon required is reached, and then push the
ENTER/MEM K
EY
.
• Access the ADVANCED CONFIGURATION function by rotating the
ENCODER K
NOB
- SX
and select ACTIVATE by rotating the
ENCODER K
NOB
- DX
.
• Access the ADVANCED WELDING MODE function by rotating the
ENCODER K
NOB
- SX
and select ACTIVATE by rotating the
EN-
CODER K
NOB
- DX
.
• Access the PLANT CONFIGURATION function by rotating the
ENCODER K
NOB
- SX
and select ACTIVATE by rotating the
ENCOD-
ER K
NOB
- DX
.
• Exit the
CONFIG Menu
by pushing the
MENU K
EY
.
• At this stage the
SETUP Menu
has been transformed into the
ADVANCED SETUP Menu
and the
VISION S
CREEN
displays the
following additional icons:
- ADVANCED CONFIG
- ADVANCED MODE
- EQUIPMENT LAYOUT
- WELD LOG
MENU K
EY
Used to exit the
ADVANCED SETUP Menu
and take the
VISION S
CREEN
back to the
welding phase.
ENCODER K
NOB
- SX
Used to scroll the various icons (sub-menus) in the menu and then select them.
ENTER/MEM K
EY
Used to access the menu related to the icon selected.
WARNING:
• It is impossible to weld!
• If the
VISION S
CREEN
is protected by a password, access to this menu will only be allowed by entering the correct password.
ACCESSING THE SUB-MENUS
To access the sub-menus included in the
ADVANCED SETUP Menu
, you must:
• Turn the
ENCODER K
NOB
- SX
to select the desired icon.
• Push the
ENTER/MEM K
EY
.
“HT4” CONTROL PANEL
It is not possible to access the
ADVANCED SETUP Menu
and all the related sub-menus using the “HT4” control panel.
