CEA DIGITECH vision PULSE 3000, Operator'S Manual

Page: 76 / 100

52
GAS K
EY
Activates the flow of gas.
SPECIAL FUNCTIONS (F
X
) K
EY
Used to access the SPECIAL FUNCTIONS (Fx) saved in the JOB selected.
4 - WELDING JOB
WARNING: All the parameters saved within a JOB (including SPECIAL FUNCTIONS (Fx)) can be viewed but not edited!
“DH” CONTROL PANEL
MENU K
EY
ENTER/MEM K
EY
ENCODER K
NOB
- SX ENCODER K
NOB
- DX
VISION S
CREEN
SX K
EY
DX K
EY
m/min
V
11.1 33.3
013
MENU K
EY
Used to access the PROCESS SELECTION Menu (PROCESS) and subsequent menus, as
applicable.
SX K
EY
Scrolls the active parameters in succession, only on the VISION S
CREEN
, based on the type of
welding process saved in the JOB selected.
In this case, where possible, the values displayed will be those measured.
DX K
EY
Scrolls the active parameters in succession, only on the VISION S
CREEN
, based on the type of
welding process saved in the JOB selected.
In this case, where possible, the values displayed will be those measured.
“HT4” CONTROL PANEL
WELDING MODE SELECTION LED
WELDING MODE SELECTION K
EY
WIRE K
EY
ENCODER K
NOB
- A
PARAMETER SELECTION K
EY
- A
PARAMETER SELECTION LED - A
PARAMETER DISPLAY S
CREEN
- A
SPECIAL FUNCTIONS (F
X
) LED
SPECIAL FUNCTIONS (F
X
) K
EY
GAS K
EY
ENCODER K
NOB
- V
PARAMETER SELECTION K
EY
- V
PARAMETER SELECTION LED - V
PARAMETER DISPLAY S
CREEN
- V
HOLD Function LED
PARAMETER DISPLAY S
CREEN
- A
Shows the JOB term or value of the parameter indicated by the
PARAMETER SELECTION LED -
A
.
PARAMETER SELECTION LED - A
The LED unit shows the welding parameter selected using the
PARAMETER SELECTION K
EY
- A
.
PARAMETER SELECTION K
EY
- A
Scrolls the active parameters in succession, based on the type of welding process saved in
the JOB selected.
In this case, where possible, the values displayed will be those measured.
WELDING MODE SELECTION LED
The LED unit indicates the welding mode saved in the JOB selected, which is coherent with
the VISION S
CREEN
.
PARAMETER DISPLAY S
CREEN
- V
Shows the number for the JOB selected or the value for the parameter indicated by the
PARAMETER SELECTION LED - V .
PARAMETER SELECTION LED - V
The LED unit indicates the welding parameter selected using the PARAMETER SELECTION K
EY
- V .
PARAMETER SELECTION K
EY
- V Used to access displaying of the SPECIAL FUNCTIONS (Fx) saved in the JOB selected.
SPECIAL FUNCTIONS (F
X
) K
EY
Used to access the SPECIAL FUNCTIONS (Fx) saved in the JOB selected.