Cayman Systems 2E-H-W, User Manual

Page: 93 / 170

Cayman 2E-H-W User’s Guide Using the Command Line Interface
November 2000
4-35
can be any number between 1 and 10. The default value for the
integer
argument is 10.
set PPP module terminate-max integer
Specifies the maximum number of unacknowledged termination
requests that your Cayman 2E-H-W will send before terminating the
PPP link. The integer argument can be any number between 1 and
10. The default value for the
integer
argument is 2.
set PPP module restart-timer integer
Specifies the number of seconds the Cayman 2E-H-W should wait
before retransmitting a configuration or termination request. The
integer argument can be any number between 1 and 30. The default
value for the integer argument is 3 seconds. You can reduce the
restart timer value if your link is relatively fast (28,800 bps or
greater). Conversely, you should increase the restart timer value for
slow links.
set PPP module connection-type [ instant-on | always-on ]
Specifies whether a PPP connection is maintained by the Cayman
2E-H-W when it is unused for extended periods. If you specify
always-on
, the Cayman 2E-H-W never shuts down the PPP link. If
you specify
instant-on
, the Cayman 2E-H-W shuts down the PPP
link after the number of seconds specified in the
time-out
setting
(below) if no traffic is moving over the circuit.
set PPP module time-out integer
If you selected a connection type of
instant-on
, specifies the
number of seconds, in the range 30-600, the Cayman 2E-H-W should
wait for communication activity before terminating the PPP link. The
default is 300 seconds.
Port Authentication
You can use the following commands to specify how your Cayman
2E-H-W should respond when it receives an authentication request
from a remote peer. The settings for port authentication on the local