Cayman Systems 2E-H-W, User Manual

Page: 78 / 170

Using the Command Line Interface Cayman 2E-H-W User’s Guide
4-20
November 2000
set bridge ethernet [ A | B ] option { on | off }
Enables or disables bridging services for the Ethernet interface.
set bridge ethernet [ A | B ] filters pppoe-only
{ on | off }
Enables or disables bridging services for the specified Ethernet
interface.
set bridge interwan-bridging { on | off }
Enables or disables bridging between remote networks.
DHCP Settings
As a Dynamic Host Control Protocol (DHCP) server, your Cayman
2E-H-W can assign IP addresses and provide configuration
information to other devices on your network dynamically. A device
that acquires its IP address and other TCP/IP configuration settings
from the Cayman 2E-H-W can use the information for a fixed period
of time (called the DHCP lease).
set dhcp option { off | server | relay-agent }
Enables or disables DHCP services in the Cayman 2E-H-W. You must
enable DHCP services before you can enter other DHCP settings for
the Cayman 2E-H-W.
If you turn off DHCP services and save the new configuration, the
Cayman 2E-H-W clears its DHCP settings.
set dhcp start-address ip_address
If you selected
server
, specifies the first address in the DHCP
address range. The Cayman 2E-H-W can reserve a sequence of up to
253 IP addresses within a subnet, beginning with the specified
address for dynamic assignment.
set dhcp end-address ip_address
If you selected
server
, specifies the last address in the DHCP address
range.