Cayman Systems 2E-H-W, User Manual

Page: 68 / 170

Using the Command Line Interface Cayman 2E-H-W User’s Guide
4-10
November 2000
reset log
Rewinds the diagnostic log display to the top of the existing Cayman
2E-H-W diagnostic log. The
reset
log command does not clear the
diagnostic log. The next
show log
command will display information
from the beginning of the log file.
reset ppp [enet-B]
Resets the point-to-point connection over the WAN interface. When
you issue a
reset ppp
command, the Cayman 2E-H-W closes any PPP
session (including PPP over Ethernet). On older versions of the
Cayman 2E-H-W, the
reset ppp
command initializes the modem
connected to the serial port.
restart [seconds]
Restarts your Cayman 2E-H-W. If you include the optional
seconds
argument, your Cayman 2E-H-W will restart when the specified
number of seconds have elapsed. You must enter the complete
restart
command to initiate a restart.
show bridge interfaces
Displays bridge interfaces maintained by the Cayman 2E-H-W.
show bridge table
Displays the bridging table maintained by the Cayman 2E-H-W.
show crash
Displays the most recent crash information, if any, for your Cayman
2E-H-W.
show dhcp agent
Displays the DHCP relay-agent leases being administered by your
Cayman 2E-H-W.