Cayman Systems 2E-H-W, User Manual

Page: 76 / 170

Using the Command Line Interface Cayman 2E-H-W User’s Guide
4-18
November 2000
Displaying Current
Router Settings
You can use the
view
command to display the current CONFIG
settings for your Cayman 2E-H-W. If you enter the
view
command at
the top level of the CONFIG hierarchy, the CLI displays the settings
for all enabled functions. If you enter the
view
command at an
intermediate node, you see settings for that node and its subnodes.
Stepping Through
Cayman 2E-H-W
Configuration
The Cayman 2E-H-W command line interface includes a step mode
to automate the process of entering configuration settings. When
you use the CONFIG step mode, the command line interface
prompts you for all required and optional information. You can then
enter the configuration values appropriate for your site without
having to enter complete CLI commands.
When you are in step mode, the command line interface prompts
you to enter required and optional settings. If a setting has a default
value or a current setting, the command line interface displays the
default value for the command in parentheses. If a command has a
limited number of acceptable values, those values are presented in
brackets, with each value separated by a vertical line. For example,
the following CLI step command indicates that the default value is
off
and that valid entries are limited to
on
and
off
.
option (off) [on | off]:
on
You can accept the default value for a field by pressing the Return
key. To use a different value, enter it and press Return.
You can enter the CONFIG step mode by entering
set
from the top
node of the CONFIG hierarchy. You can enter step mode for a
particular service by entering
set service_name
. For example:
Dogzilla (top)>>
set system
Stepping set mode (press Control-X <Return/Enter> to
exit)
...
system
name (“Dogzilla”):
Mycroft
Diagnostic Level (High):
medium
Stepping mode ended.