USER MANUAL
98
7-4-2 Configure Display Properties
(SMP-PROPLUS)
1. Login SMP Web Manager.
2. Click "
SYSTEM
" and switch to “
DISPLAY
” page.
3. Select a screen resolution and refresh rate. You can specify a
predefined screen resolution and refresh rate or assign your
own specification by selecting “
User define
”.
* User Define
If you cannot select a suitable refresh rate on the list, you can
choose “
User Define
” and click [
User define
] button. Then,
you can select a resolution and set a suitable refresh rate.
If you choose VGA or DVI
as output port, you can see
the “
*
” beside the resolution
value which is the supported
EDID value reported by the
display.
We D O N O T g u a r a n t e e
any number you choose or
enter on the User-Defined
Display Resolution page
can be compatible to your
display. You must test the
compatibility of your display
before you use it.
Some display’s refresh rate
is not happened to be an
integer (e.g. 59.9 Hz). You
must check with your display
vendor or try some numbers
in the vicinity of that possible
refresh rate.
