Cateye TR200DW280P, Instruction Manual

Page: 37 / 42

ENG -35
ENG
Trouble shooting
If a malfunction occurs, check the following before contacting CatEye or your retailer for
repair or service.
Trouble on display
Trouble Check Items Remedy
Display motion be-
comes slower.
Flashes on the
screen.
No displays appear.
Meaningless display
appears.
Cannot measure the
trip speed (cadence)
Is the surrounding temperature
low (below zero degree Celsius
or 32 degrees Fahrenheit)? Temperatures below freezing may re-
sult in slower screen response. Data
is not affected.
The remaining battery ca-
pacity for the computer is
low. Replace it with a new battery
(CR2032) immediately.
After replacement, be sure to perform
the restarting operation (page 10).
Is the battery for the com-
puter empty? Replace it with a new battery
(CR2032).
After replacement, be sure to perform
the restarting operation (page 10).
Perform the restarting operation
(page 10).
Have you checked the sensor ID?
Is the computer ID Synch'ed
with somebody else's sensor?
Is the Speed and Cadence
sensor icon on , ?
Check whether the distance
between the speed (ca-
dence) sensor and the mag-
net is too large.
Is the sensor zone of the
speed (cadence) sensor off
the center of the magnet?
Has the power-saving function
been activated, showing only
date/clock on the screen?
Is the battery for the speed
sensor empty?
Check the speed sensor ID (page 28)
for
SP1 (speed sensor 1) or SP2
(speed sensor 2).
If the Speed and Cadence sensor
icon is off
, , the computer can-
not receive data. Press the M1/+ or
M2/- button once to turn on the icon.
Adjust the position of the speed (ca-
dence) sensor and that of the mag-
net correctly. (See “How to install the
unit on your bicycle” on page 6.)
Press any button on the computer
to cancel the power-saving function.
Replace it with a new battery
(CR2032).
After replacement, be sure to press
the
RESET button on the speed
sensor.
Continue
Pressing the LT button
does not turn on a light.
Check whether lights
up on the computer screen.
The remaining battery ca-
pacity for the computer is
low.
Replace it with a new battery
(CR2032).
After replacement, be sure to
perform the restarting operation
(page 10).