ENG
-34
60
80
100
120
140
160
180
200
rpm
Cadence
CDC.ZONE
80 - 120 rpm
Cadence zone
Default zone
Target training zone
Alarm
ZONE
Use of the target zone
When the target cadence zone is turned
On
, cadence is monitored against set zone range.
When the cadence is out of the zone during measurement, the computer sounds an alarm
and notifies a rider by flashing
.
For training aiming at a cadence of 80 to 120 rpm, set the lower limit to 80 and upper limit
to 120.
Then, the computer emits an alarm when the cadence falls below 79 rpm, or rises above
121 rpm.
Once the target zone is set to
On
, the relevant data are recorded to the file and the time in
zone the time in the zone, time above the zone, and time below the zone and their percent-
ages can be viewed in the file view (page 23).
* You can enter any upper/lower limit to the zone.
* For the target zone, you can change on/off and the upper/lower limit of the target zone
from the menu screen “Setting the target cadence zone” (page 33).
* On/off of the alarm sound is selected from the menu screen “Setting sound” (page 32).
