CASUALPLAY Q-Retraktor Fix, Instruction Manual

Page: 25 / 98

23
TAKING THE CHILD CAR SEAT OUT OF THE VEHICLE (
SUPPORT LEG)
• Unfasten the safety harness and take the child out of the car seat.
• Remove the support leg from the child seat. Simultaneously press the
two buttons found on the upper part of the base and at the same time pull
the support leg (fig.25).
• Release the two isofix connectors by pulling the front lever (coloured red)
(fig.18). They will click when released, and a red signal will appear on
both connectors (fig.19).
• Remove the child seat from the vehicle seat.
WARNING: If the retractor gets blocked, unblock it by pulling the two chest
sections of the harness pressing on the metal plate where the harnesses
are joined.
REMOVING THE UPHOLSTERY
• If necessary unfasten the harness.
• Move the headrest to the highest position.
• Take the cover off the headrest, unfastening the elastic straps on the back.
• Release the two plastic pivots on the backrest (fig.26). Pull the cover to
the sides under the headrest.
• Undo the clasps and unfasten the elastic straps found on the armrests,
on the left and the right (fig.27-28).
• Pass the buckle through the upholstery.
• Lastly, pull the upholstery upwards.
FITTING THE UPHOLSTERY
• Follow the same steps as above in reverse order.
• Make sure that the harness straps pass correctly though the gaps in the
upholstery, and that they are not twisted.
MAINTENANCE
• Follow the washing instructions indicated on the different care labels on
the fabric parts.
• The plastic parts can be cleaned with a soapy solution, do not use
abrasive products.