CASTLE GA2006H Operating Manual Download Page 47

Page: 47 / 76

Page 47

Chapter 6

Using the Vexo H

The Vexo H instrument has three states of basic operation: -

•

Stop State

•

Record State

•

Playback

Stop State

This is the default state of the Vexo H instrument and whilst in this state limited

calculations are displayed on the instruments screen but no values are recorded

in the internal flash memory.

It is only possible to change Settings and undertake Calibration of the instrument

whilst in Stop State. Exposure Points are not available when in Stop State.

Scroll through the available parameters using the

key.

The parameters available in Stop State are: -

•

Arms

•

Aeq

•

Peak

•

Vector

Weighting is fixed to Wh (Hand Arm) on the Vexo H instrument, the range can

be changed through the Main Menu.

To start a recording (Record State) press the

key at any time.

Parameter

Weighting

Range

Battery Level

Measurements





rms



m/s

X: 3.51

m/s

Y: 2.18

m/s

Z: 1.04

Summary of Contents for GA2006H













































































Search results

Summary of Contents for GA2006H

Reviews:

Related manuals for GA2006H

Brands by name

Popular brands

CASTLE GA2006H, Operating Manual

Search results

Summary of Contents for GA2006H

Reviews:

Related manuals for GA2006H

Brands by name

Popular brands