CASTLE GA2006H Operating Manual Download Page 48

Page: 48 / 76

Page 48

Record State

Whilst the instrument is in the Record State the vibration activity is analysed

and all parameters available on your instrument are calculated.

Record State is easily identified by the Record Symbol and the Recording Time in

the top left hand corner of the screen.

It is not possible to enter the Menu system or turn the instrument off whilst in

Record State.

Scroll through the available parameters using the

key.

The parameters available in Record State are: -

•

Arms

•

Aeq

•

Peak

•

Vector

To end a recording press the

key.

If File Naming is turned on then you will be prompted to enter a file name. See

page 39 for more information.

The data is saved to the internal flash memory. If Show Results or Exposure

Points are turned on, then the instrument will automatically display the relevant

parameters.

If neither of the above are turned on then the instrument is placed back into

Stop State.

Recordings saved on your instrument will not be lost if the battery pack is

removed.

Parameter

Weighting

Range

Battery Level

Measurements





rms



m/s

X: 3.51

m/s

Y: 2.18

m/s

Z: 1.04

00:02:01

Record Symbol &

Recording Time

Summary of Contents for GA2006H













































































Search results

Summary of Contents for GA2006H

Reviews:

Related manuals for GA2006H

Brands by name

Popular brands

CASTLE GA2006H, Operating Manual

Search results

Summary of Contents for GA2006H

Reviews:

Related manuals for GA2006H

Brands by name

Popular brands