Page 65
EC Declaration of Conformity
The CE marking of the Castle Vexo Vibration Meter indicates compliance with the
EMC and Low Voltage Directive.
The C-Tick marking of the Castle Vexo Vibration Meter indicates compliance with
EMC requirements for Australia and New Zealand.
We, Castle Group Ltd declare that the: -
•
Vexo H and Vexo S range of Vibration Meters
have in accordance with the following Electromagnetic Compatibility Directives: -
•
SI 2005/281
•
2004/108/EC
been designed and manufactured to meet the following tests: -
•
EMC Emissions:
EC 61000-6-3:2007+A1:2011
EN61326-1:2006
CISPR 22:2008
EN55022:2006+A1:2007
FCC Rules, Part 15 2003 Class B
•
EMC Immunity:
IEC 61000-6-2:2005
EN61326-1:2006
Levels: ±4kV(Contact) , ±8kV(Air)
•
RF EM Amplitude Mod:
IEC 61000-6-2:2005
Level 10 V/m
No performance or function degradation is noticeable whilst subject to electrostatic discharge or a.c power
frequency and radio frequency fields under any operating condition with the meter and no differences in radio
frequency emissions are apparent between operating modes where appropriate.
Approved cables for use with Castle Vexo meters to comply with these specifications: -
Cable
Order Code
Length
Vexo to PC (USB)
01ZL1108-01
1m
The technical file for the above is maintained at Castle Headquarters.
I hereby declare that the instruments named above have been designed to comply with the relevant sections of the
above referenced specifications, and that the above named instruments comply with all essential requirements of
the specified Directives.
Simon Bull
Managing Director
Castle Group Ltd, Salter Road, Scarborough, North Yorkshire, YO11 3UZ
August 2012
