Page 16
Attaching & Removing the Accelerometer
On the accelerometer cable connector locate the orientation key, and on the
instrument locate the RED keying identification mark of the 5 pin Lemo socket.
Position the accelerometer cable so that the orientation key is in line with the
RED mark and then gently push the accelerometer cable into the instruments
socket.
To unlatch and remove the accelerometer cable gently pull the on the knurled
part of the stem and pull the accelerometer from the instrument.
Do not twist the connector, doing so will likely damage internal wiring which
would not be covered under warranty.
Removal of the accelerometer can be achieved with the instrument powered on
or off.
