Page 46
Sensitivity
Select this option to set the sensitivity value for each axis that has been supplied
with your accelerometer.
No vibration calibrator is required for this option.
Press
to return to the previous screen with any valid changes made.
Use the
key to highlight the relevant axis and press
to select and change
its value.
Use the
key to change the value highlighted then press
to move the
highlight to the next position.
Valid levels are between 5.00 and 15.00 mV/g.
If an invalid value is selected the warning message
05.00 to 15.00 only
will be
displayed in red.
Press
to return to the previous screen cancelling any changes made.
Repeat for all axes as required.
Value
14:32 23/08/12
X Value
Y Value
Z Value
10.00
10.00
10.00
mV/g
mV/g
mV/g
Sensitivity
14:32 23/08/12
X Sensitivity Value:
mV/g
1
0 : 0 0
Value Not
Valid
warning
Message
Sensitivity
14:32 23/08/12
X Sensitivity Value:
mV/g
2
0 : 0 0
05.00 to 15.00 only
