38
5. You can hear a signal and the operation indicator is flashing when the desired
temperature is reached..
6. The device will beep once desired temperature is reached. Place the vacuumed food
into the cooking vessel. If needed weight the vacuumed bags.
7. The device counts down the time and will beep again, once time is over. Then “END”
is shown in display.
8. When you want to change the settings please press
for 3 seconds and change
settings as described above.
9. You can deactivate the device by pressing
for 3 seconds. The device will switch
to standby mode.
Warning
► Risk of scalding! Carefully remove the food.
Note: EE1
► If the device should indicate “EE1” in the LED display after switching on even though
the water filled in is above the minimum level, please add some salt to the water and
stir well.
18.2 Wi-Fi Module
Press the button
briefly to activate the integrated W-LAN module.The device beeps
once and
starts to flash slowly. If the device is aleady connected to your W-
LAN (pairing process), the
flashes for approx. 3-5 seconds and lights up
constantly after a successful connection. If
continues to flash, no connection to
the configured W-LAN could be achieved.(reception level is too low or W-LAN name or
access have been changed or W-LAN password is wrong). If the pairing process has not
yet been carried out, please follow steps mentioned in pairing instructions.
19 Storage
Store the unit in its upright position, out of the reach of children.
PLEASE NOTE
► Turn off the device after use. So you can avoid unnecessary energy consumption
and ensure your safety.
► Always unplug the appliance from its outlet immediately after using and before
cleaning.
