manualshive.com logo in svg

Casio QT-6000, Reference Manual

The Casio QT-6000 is a reliable and efficient point-of-sale solution for businesses. Whether you need to perform sales transactions or track inventory, this feature-packed device has got you covered. To ensure smooth operations, make sure to download the free operation manual from manualshive.com for easy reference and assistance.

Share
Download
background image

R-109

QT-6000 Reference Manual

Satellite

Master

Terminal

files

Terminal

files

Consolidation

work

1

2

3

2

Satellite

Master

Terminal

files

Terminal

files

Consolidation

work

1

, 

4

2

3

2

3-6-1.

X/Z collection

This function is used to obtain the counters and totals of the individual terminals.
For collection results (normal end or error end), the satellite does not print it out on the
receipt / journal during X collection. But the results of the Z collection are printed out in
the journal during Z collection.

3-6-1-1. X collection processing

X collection processing is performed as the figure shown below.

1

An X collection command is started up from the master terminal.

2

One objected terminal sends its report data to the consolidation work file of the master.

3

Report data from the objected terminal file are printed out on the master's R/J printer.

4

After processing of the master terminal completes, the same processes described in the
item 

1

 to 

3

 are executed for the other terminals. Data will be sent without the clerk

noticing, even when the satellite in the process of registering.

3-6-1-2. Z collection processing

Z collection processing is performed as the figure shown below.

1

When a Z collection command is started up from the master terminal, the master first
locks one objected terminal. (Z lock)

2

The objected terminal sends its report data to the consolidation work file of the master
terminal.

3

Report data from the satellite terminal file are printed out on the master R/J printer.

4

The same processes described in the item  

1

 to 

3

 are executed for the other terminals.

5

After the  processing of the master terminal completes, the data of objected terminal file
are cleared, and then the Z lock of the objected terminal is released.

NOTE:

• When a Z collection is performed, the consolidation data cannot be output. If output of

consolidation data is desired, perform “collection/consolidation” processing described
later.

• Even if an error is occurred, or if the processing is terminated, the data to be collected

remains as they are, and Z lock statuses are automatically released.

Summary of Contents for QT-6000



















































































































































































































Reviews:

No comments

Related manuals for QT-6000

Nautilus Hyosung MONiMAX8200QTN Operator'S Manual preview
MONiMAX8200QTN
Brand: Nautilus Hyosung Pages: 120
PASCO PS-3238 Product Manual preview
PS-3238
Brand: PASCO Pages: 3
Kaliming Nex Bill KL-2000 seies Manual preview
Nex Bill KL-2000 seies
Brand: Kaliming Pages: 100
Eaton E5-648-C446 Series Instruction Leaflet preview
E5-648-C446 Series
Brand: Eaton Pages: 24
Olivetti ECR 2200 Instructions Manual preview
ECR 2200
Brand: Olivetti Pages: 64
Sam4s ER-5100? SERIES Programming & Operating Manual preview
ER-5100? SERIES
Brand: Sam4s Pages: 92
Casio SE-C450 User Manual preview
SE-C450
Brand: Casio Pages: 134
Cashmaster Sigma 105 Quick Start Manual preview
Sigma 105
Brand: Cashmaster Pages: 2
MegaCount OMEGA-ETH User Manual preview
OMEGA-ETH
Brand: MegaCount Pages: 23
impulse Automation Hengstler tico 734 Operating Instructions preview
Hengstler tico 734
Brand: impulse Automation Pages: 4
impulse Automation HENGSTLER tico 731.2 Operating Instructions Manual preview
HENGSTLER tico 731.2
Brand: impulse Automation Pages: 6
IQAir ParticleScan Lite Operating Instructions preview
ParticleScan Lite
Brand: IQAir Pages: 2
Helwett Packard 5314A Operating And Service Manual preview
5314A
Brand: Helwett Packard Pages: 17
Delfield Shelleymatic SH2C-74-NU Service And Installation Manual preview
Shelleymatic SH2C-74-NU
Brand: Delfield Pages: 16
Delfield Shelleysteel SCS-30 Installation, Operation And Maintenance Manual preview
Shelleysteel SCS-30
Brand: Delfield Pages: 28
Kübler CODIX 924 Manual preview
CODIX 924
Brand: Kübler Pages: 28
MULTISPAN BC-1046D Operating Manual preview
BC-1046D
Brand: MULTISPAN Pages: 4

Brands by name

Popular brands

Load more brands