manualshive.com logo in svg

Casio QT-6000, Reference Manual, Page: 2 / 210

Share
Download
Casio QT-6000 Reference Manual Download Page 2

R-2

Preface

This manual is intended to be used as a reference to the QT-6000 system. It provides details
to allow whole understanding of the system capabilities, its operation, and how it can be used
to solve many problems within the retail outlet. This manual does not describe actual
programming, which is covered in the QT-6000 programming manual.

This manual consists of the following chapters:

1. Introduction

This chapter describes the concepts of development of the QT-6000 system.

2. Hardware configuration

This chapter outlines the hardware, optional devices and configurations of QT-6000
system.

3. Application systems

This chapter outlines the application system and overviews the function provided for the
QT-6000 system.

4. Manager operation

This chapter explains the manager operations to use QT-6000 system.

5. Registrations

This chapter explains actual registration operations with example.

6. Refund mode operation

This chapter explains registrations in the RF or REG– mode.

7. Read and reset

This chapter explains detail of the read and reset operations and reports.

8. Appendices

These chapters show the record format and descriptions of individual files, total
calculation method, meaning of error messages, etc.

• System down and recovery (in the Installation and Down Recovery manual)

This chapter explains actions to take and recovery methods when the system goes down.

Note: Casio reserves the right to change equipment and specifications without obligation

and notification. The terms used in this manual may be different from those used in
other manuals of Casio’s product.

Printing history

Manual version

Software version

Version 1.0 (tent.): July, 2004

First Edition: July, 2004

Version 1.0

Version 1.0: August, 2004

First Edition: August, 2004

Version 1.0

Version 1.2: September, 2004

September, 2004

Version 1.2

Version 1.3: July, 2005

July, 2005

Version 1.3

Version 1.5: September, 2006

October, 2006

Version 1.5

Revised points

2005.04.12.
Collecting mistake: page-209.
2005.07.14. (Version 1.3)
Modifying file format: page-188, 189, 191
2006.09.07 (Version 1.5)
Add New Zealand rounding option: page- 195

✍

 Version 1.5

Summary of Contents for QT-6000



















































































































































































































Reviews:

No comments