manualshive.com logo in svg

Casio QT-6000, Reference Manual

The Casio QT-6000 is a reliable and efficient point-of-sale solution for businesses. Whether you need to perform sales transactions or track inventory, this feature-packed device has got you covered. To ensure smooth operations, make sure to download the free operation manual from manualshive.com for easy reference and assistance.

Share
Download
background image

R-78

 Application System

2-13.

Electronic journal

There are two types of electronic journal. One is “normal” electronic journal, the other is
“intelligent” electronic journal. The “normal” electronic journal stores all operations such
as registration, report issuing and programming, but the “intelligent” electronic journal
stores only registration. And the “intelligent” electronic journal stores one receipt when the
transaction is finalized (not stored at new balance). You can select the “normal” or the
“intelligent” electronic journal by allocating the “normal” electronic journal file (file-048
and -648) or the “intelligent” electronic journal file (file-050 and -650)
Electronic journal is stored in the terminal memory, so it is possible to print journal
(electronic journal report) by date or by consecutive number.
And since the journal data is stored in the memory, you can collect journal data from all
terminals in the system. Also, you can issue receipt and guest receipt from electronic
journal.

2-13-1. Storing electronic journal

The electronic journal starts automatically and it ends if the journal memory becomes full.
When the memory becomes full, the terminal alerts end error which you can select to alert
or not to alert by programming. Refer to the page 38 of the programming manual.

Notes:

Even if the electronic journal memory is full, registrations are not disturbed.

2-13-2. Issuing electronic journal report

You can issue both type of the electronic journal read or reset report by date or by
consecutive number.
Refer to the page 145 of this manual.

2-13-3. Displaying electronic journal and producing guest receipts after sales

Pressing the <EJ DISP> key shows the most recent transactions. You can go to older
transactions by pressing the <PAGE UP> key while newer transactions by the <PAGE
DOWN> key. And also you can move lines in a transaction by the <

↑

> or <

↓

> key.

During displaying an transaction, you can issue the post receipt of this transaction by
pressing the <RECEIPT> key. If the guest receipt in the original transaction was issued
you can get the copy of the guest receipt by pressing the <RECEIPT> key.

Summary of Contents for QT-6000



















































































































































































































Reviews:

No comments

Related manuals for QT-6000

Casio TK-1550 User Manual preview
TK-1550
Brand: Casio Pages: 112
Olympia CM 1846S-F Operating Instructions Manual preview
CM 1846S-F
Brand: Olympia Pages: 39
Nautilus Hyosung MX5600 Installation Manual preview
MX5600
Brand: Nautilus Hyosung Pages: 26
Sam4s ER-180T Operation And Programming Manual preview
ER-180T
Brand: Sam4s Pages: 7
TEC TEC MA-85 Owner'S Manual preview
TEC MA-85
Brand: TEC Pages: 120
Sharp ER-A320 Instruction Manual preview
ER-A320
Brand: Sharp Pages: 76
Sharp ER-A440 Service Manual preview
ER-A440
Brand: Sharp Pages: 95
Sharp ER-A320 Installation Manual preview
ER-A320
Brand: Sharp Pages: 6
Sharp ER-A410 Instruction Manual preview
ER-A410
Brand: Sharp Pages: 190
Sharp ER-A440 Installation Manual preview
ER-A440
Brand: Sharp Pages: 9
Sharp ER-A410 Specification Sheet preview
ER-A410
Brand: Sharp Pages: 2
Sharp ER-A320 Service Manual preview
ER-A320
Brand: Sharp Pages: 5
Sharp ER-A347 Instruction Manual preview
ER-A347
Brand: Sharp Pages: 115
Sharp UP-800F Instruction Manual preview
UP-800F
Brand: Sharp Pages: 242
Sharp XE-A102B Instruction Manual preview
XE-A102B
Brand: Sharp Pages: 140
Sharp XE-A101 Service Manual preview
XE-A101
Brand: Sharp Pages: 25
Sharp UP-600 Instruction Manual preview
UP-600
Brand: Sharp Pages: 230
Sharp UP-600 Installation Manual preview
UP-600
Brand: Sharp Pages: 16

Brands by name

Popular brands

Load more brands