Casio PV-750 Plus User Manual Download

Page: 58 / 206

Contacts Field Names

* Indicates entries on which data items are sorted.

•

(B): Business

•

(H): Home

To edit Contacts Untitled category and Free entry names

1. In the Contacts Mode, display the list screen of the Untitled category

you want to edit.

2. Tap the

Menu Bar

icon to display the menu bar, and then tap

Option

–

Name edit

3. Tap the category name or one of the entry names, and make any changes

you want. Repeat this step for as many names as you want to change.

•

You can assign category names up to 14 characters long, and entry names
up to 10 characters long.

4. After everything is the way you want, tap

Save

to store the data.

Business

Personal

Phone Book

Untitled 1 - 3

(Phone, SIM)

Name*

Free 1*

Company*

Phone (H)

Mobile*

Free 2

Phone (B)

Fax (H)

Phone (H)

Free 3

Fax (B)

Mobile

Fax (H)

Free 4

Address (B)

Address (H)

Free 5

E-mail

Free 6

Position

Company

Free 7

Department

Phone (B)

Free 8

Phone (H)

Fax (B)

Free 9

Fax (H)

Position

Free 10

Mobile

Department

Free 11

Address (H)

Address (B)

Free 12

Note

Free 13

Summary of Contents for PV-750 Plus















































































































































































































Search results

Summary of Contents for PV-750 Plus

Reviews:

Related manuals for PV-750 Plus

Brands by name

Popular brands

Casio PV-750 Plus, User Manual

Search results

Summary of Contents for PV-750 Plus

Reviews:

Related manuals for PV-750 Plus

Brands by name

Popular brands