Casio PV-750 Plus User Manual Download

Page: 104 / 206

104

5. After everything is the way you want, tap

Save

to place the message

onto the

Outbox

tab.

•

A mail message must have data in its

fields. The PV Unit will refuse

to store the message if it does not contain

•

You can input up to 16KB (about 16,000 characters) of text (including

, and other header fields) for each mail message.

•

Tapping

Save

Send

after inputting a message that contains too many

characters, causes the error message

Too many total characters for

To, Cc, Bcc, Reply-To, and Subject

appear on the display. Try deleting

some characters and then tap

Save

Send

again.

You can input addresses into the

Bcc

, and

Reply-To

fields of a mail

message using e-mail addresses stored in the Contacts Mode or by manually
typing in e-mail addresses.

To manually input an e-mail address

1. While inputting a mail message, tap an address field (

Bcc

, or

Reply-To

Summary of Contents for PV-750 Plus















































































































































































































Search results

Summary of Contents for PV-750 Plus

Reviews:

Related manuals for PV-750 Plus

Brands by name

Popular brands

Casio PV-750 Plus, User Manual

Search results

Summary of Contents for PV-750 Plus

Reviews:

Related manuals for PV-750 Plus

Brands by name

Popular brands