135
Chapter 11 Data Communication
To detach the PV Unit from the cradle
1. Turn off PV Unit power.
2. Lift up on the PV Unit while holding down the cradle’s
Release
button.
Data Communications Between Two PV Units
This section describes how to set up and communicate between two PV Units.
To connect two PV Units
1. Make sure that the power of both units is turned off.
2. Place the PV Units onto their cradles.
•
Gently but firmly press down on the PV Units to ensure that they are
inserted into the cradles as far as they will go.
Release
button
11