146
6. Tap the buttons under
Parity
,
Bit length
, and
BPS
to make the settings
you want.
•
Note that the settings you make here must match those of the connected
SF/CSF/NX Series Unit. Otherwise, proper data communication will be
impossible.
7. After making all the settings you want, press
Set
to register them, and
return to the screen in step 4, above.
•
Now you can continue with the following data receive procedure.
To receive data from an SF/CSF/NX Series Unit
1. After connecting the two units, turn on the PV Unit.
2. Display the list view in a mode whose data can be received with this
setup.
•
This configuration supports receipt of Contacts, Memo, Schedule and
To Do data.
•
REMINDER 1, REMINDER 2, EXPENSE, CALENDAR, SKETCH,
and FREE FILE data cannot be received.
3. Tap the
Menu Bar
icon to display the menu bar, and then tap
System
–
Data communication
.
4. Tap the button next to
SF/CSF/NX
.
•
At this time you could perform steps 5 through 7 under “To make
communication parameter settings” above to make communication set
up parameter settings if you want.
5. Tap
Set
.
6. Perform the required operations on the SF/CSF/NX Series Unit to send
data. See the manual that comes with the unit you are using for details.
