Casio EX-S500GY User Manual Download

Page: 193 / 235

VIEWING IMAGES ON A COMPUTER

193

■

USB Connection Precautions

• Do not leave the same image displayed on your computer

screen for a long time. Doing so can cause the image to
“burn in” on the screen.

• Never disconnect the USB cable, or perform any camera

or USB cradle operation while data communication is in
progress. Doing so can cause data to become corrupted.

Using a Memory Card to Transfer Images
to a Computer

The procedures in this section describe how to transfer
images from the camera to your computer using a memory
card.

Using a Computer with a Built-in SD Memory Card Slot

Insert the SD memory card directly into the slot.

Using a Computer with a Built-in PC Card Slot

Use a commercially available PC card adaptor (for an SD
memory card or MMC). For full details, see the user
documentation that comes with the PC card adaptor and
your computer.

Summary of Contents for EX-S500GY












































































































































































































































Search results

Summary of Contents for EX-S500GY

Reviews:

Related manuals for EX-S500GY

Brands by name

Popular brands

Casio EX-S500GY, User Manual

Search results

Summary of Contents for EX-S500GY

Reviews:

Related manuals for EX-S500GY

Brands by name

Popular brands