Casio EX-S500GY User Manual Download

Page: 37 / 235

GETTING READY

• The above values are based on a new battery starting

from a full charge. Repeated charging shortens battery
life.

• Battery life is greatly affected by how much you use flash,

zoom and auto focus, and how long you leave power
turned on.

■

Tips to Make the Battery Last Longer

• If you do not need the flash while recording, select

(flash off) for the flash mode. See page 61 for more
information.

• Enable the Auto Power Off and the Sleep features (page

44) to protect against wasting battery power when you
forget to turn off the camera.

Supported Battery: NP-20 (Rated Capacitance: 700mAh)
Storage Medium: SD Memory Card

1 Number of Shots (CIPA Standard)

• Temperature: 23

C (73

• Monitor Screen: On
• Zoom operation between full wide to full telephoto

every 30 seconds, during which two images are
recorded, one image with flash; power turned off and
back on every time 10 images are recorded.

2 Continuous Recording Conditions

• Temperature: 23

C (73

• Monitor screen: On
• Flash: Off
• Image recorded every 15 seconds, alternating full

wide-angle and full telephoto zoom

3 Continuous Snapshot Playback Conditions

• Temperature: 23

C (73

• Scroll one image about every 10 seconds

4 Approximate time for continuous movie recording,

without using zoom.

5 Voice recording times are based on continuous

recording.

Summary of Contents for EX-S500GY












































































































































































































































Search results

Summary of Contents for EX-S500GY

Reviews:

Related manuals for EX-S500GY

Brands by name

Popular brands

Casio EX-S500GY, User Manual

Search results

Summary of Contents for EX-S500GY

Reviews:

Related manuals for EX-S500GY

Brands by name

Popular brands