background image

INTRODUCTION

8

 IMPORTANT! 

• The contents of this manual are subject to change

without notice.

• CASIO COMPUTER CO., LTD. assumes no

responsibility for any damage or loss resulting from
the use of this manual.

• CASIO COMPUTER CO., LTD. assumes no

responsibility for any loss or claims by third parties
which may arise through the use of the EX-S500.

• CASIO COMPUTER CO., LTD. shall not be held

liable for any damages or losses suffered by you or
any third party due to the use of Photo Loader and/or
Photohands.

• CASIO COMPUTER CO., LTD. assumes no

responsibility for any damage or loss caused by
deletion of data as a result of malfunction, repairs, or
battery replacement. Be sure to back up all important
data on other media to protect against its loss.

• Note that the example screens and product

illustrations shown in this User’s Guide may differ
somewhat by the screens and configuration of the
actual camera.

• The SD logo is a registered trademark.
• Windows, Internet Explorer, Windows Media, and

DirectX are registered trademarks of Microsoft
Corporation.

• Macintosh is a registered trademark of Apple

Computer, Inc.

• MultiMediaCard is a trademark of Infineon

Technologies AG of Germany, and licensed to the
MultiMediaCard Association (MMCA).

• Adobe and Reader are either registered trademarks

or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.

• Ulead is a trademark of Ulead Systems,Inc.
• Other company, product and service names used

herein may also be trademarks or service marks of
others.

• Photo Loader and Photohands are the property of

CASIO COMPUTER CO., LTD. Except as stipulated
above, all copyrights and other related rights to these
applications revert to CASIO COMPUTER CO., LTD.

Summary of Contents for EX-S500GY












































































































































































































































Reviews: