Casio EX-S500GY User Manual Download

Page: 91 / 235

OTHER RECORDING FUNCTIONS

Shooting with High Sensitivity

Higher sensitivity makes it possible to record brighter
images when there is not enough lighting available to
obtain normal exposure.

In the REC mode, press [BS] (BEST SHOT).

Use [

왖

], [

왔

], [

왗

], and [

왘

] to select the “High

Sensitivity” scene, and then press [SET].

Press the shutter button to record the image.

IMPORTANT!

• High Sensitivity is disabled automatically when any

setting other than “Auto” is selected for ISO
sensitivity. If you want High Sensitivity to be
operational after turning it on, be sure to change the
ISO sensitivity setting to “Auto” (page 114).

• Recording with high sensitivity can cause an image

to appear somewhat coarser than normal and can
cause slight deterioration of image resolution.

• A desirable level of image brightness may not be

possible under very dark conditions.

• When shooting with slow shutter speeds, use a

tripod to protect against the effects of hand
movement.

Summary of Contents for EX-S500GY












































































































































































































































Search results

Summary of Contents for EX-S500GY

Reviews:

Related manuals for EX-S500GY

Brands by name

Popular brands

Casio EX-S500GY, User Manual

Search results

Summary of Contents for EX-S500GY

Reviews:

Related manuals for EX-S500GY

Brands by name

Popular brands