20021201
Break dialog box
1-5-11
Built-in Application Basic Operations
Example:
To pause a graphing operation and then resume it
u
ClassPad Operation
(1) Use the Graph & Table application to draw a graph.
• For details about graphing, see “Chapter 3 – Using the Graph & Table Application”.
(2) While the graph is being drawn, press the
K
key.
• This pauses the draw operation and displays on
the right side of the status bar.
(3) To resume the operation, press the
K
key again.
• This resumes the draw operation, which continues
until the graph is complete.
k
Terminating an Operation (Break)
Pressing the
c
key while an expression processing, graphing, or other operation is
being performed terminates the operation.
Example:
To terminate a graphing operation
u
ClassPad Operation
(1) Use the Graph & Table application to draw a graph.
• For details about graphing, see “Chapter 3 – Using the Graph & Table Application”.
(2) While the graph is being drawn, press the
c
key.
• This terminates the draw operation and displays the Break dialog box, indicating the
Break state.
Draw is paused at the point
where
K
is pressed.
(3) To exit the Break state, tap the [OK] button.
• This returns the ClassPad to its status before you started the graphing operation.
