1 - GENERAL INFORMATION
Electro-Magnetic Compatibility (EMC)
Interference may arise as a result of add
‐
on equipment that may not necessarily meet the required standards. As
such interference can result in serious malfunction of the unit and/or create unsafe situations, you must observe
the following:
• The maximum power of emission equipment (radio, telephones, etc.) must not exceed the limits imposed by the
national authorities of the country where you use the machine
• The electro
‐
magnetic field generated by the add
‐
on system should not exceed
24 V/m
at any time and at any
location in the proximity of electronic components
• The add
‐
on equipment must not interfere with the functioning of the on board electronics
Failure to comply with these rules will render the CASE CONSTRUCTION warranty null and void.
Telematics
NOTE:
the CASE CONSTRUCTION
SiteWatch™
website (www.casesitewatch.com) will not be accessible until the
CASE CONSTRUCTION
SiteWatch™
subscription for this machine is registred by an authorized CASE CONSTRUC-
TION dealer. Contact an authorized CASE CONSTRUCTION for details.
This machine is equipped with a telematics system. This is an asset-monitoring system that combines Internet, cel-
lular, and GPS technologies. A transponder unit is mounted on the equipment that wirelessly communicates with
the user interface CASE CONSTRUCTION
SiteWatch™
at www.casesitewatch.com. Using cellular technology, the
transponder can send equipment data, including location, on/off status, usage and production metrics, diagnostic
data, movement alarms, and unauthorized usage to the interface. The system will help cut costs and keep accurate
records. See the furnished guide for operating your telematics system.
1-3
Summary of Contents for CX75C SR
