2 - SAFETY INFORMATION
• If the accumulator is not functioning correctly, consult
your CASE CONSTRUCTION Dealer.
Never try to
carry out any servicing operation on the accumulator. If
this instruction is not followed serious injury can result.
• The accumulator is charged with nitrogen under high
pressure. Do not weld or allow flames to come near to
the accumulator.
• There is high pressure fuel in the feed pipe when the en-
gine is running and immediately after it has been shut
down. Wait for 2 minutes after engine shut down be-
fore you do any maintenance or inspections to allow
the pressure to drop in the pipe.
• High-voltage is charged to the controller and/or to the
injector while the engine is running and immediately
after it has been shut down.
Do not touch the controller or the injector.
If it is necessary to touch them for maintenance pur-
poses, consult your CASE CONSTRUCTION Dealer.
Using an Implement other than a bucket
• When using a special implement (hydraulic breaker,
cutter crusher etc.), refer to the operator's manual pro-
vided with the implement.
Implement operation and maintenance
• For the implement operation and maintenance, refer to
the operator's manual provided with the implement.
Safety area
The safety area is the space necessary for the machine to
operate at the maximum range of the tool and at full swing
360 °
plus
2 m
.
(1)
Working area.
(2)
Safety area.
SMIL13CEX2517AB
1
2-10
Summary of Contents for CX75C SR
