6 - MAINTENANCE
Every 10 hours
Engine oil level
To check the engine oil level proceed as follows:
1.
Take the oil gauge out of the guide tube and
wipe any oil off with a clean cloth.
2.
Insert the gauge all the way into the guide tube,
then gently take it out.
SMIL13CEX2780AB
1
3.
If the oil level is between the
(A)
(minimum) and
(B)
(maximum), then the level is appropriate.
Also inspect the degree of soiling and viscosity
of the oil.
SMIL13CEX2781AB
2
4.
If the oil level is at or below the mark
(A)
(min-
imum) on the oil gauge, remove the fill plug,
pour in oil until the level reaches the mark
(B)
(maximum), then install the fill plug.
5.
After the inspection, insert the oil level gauge
correctly back into place.
NOTICE:
do not raise the oil level above the mark
(B)
(max-
imum) on the oil gauge.
10 - 20 min
after refilling, check
the oil level again.
SMIL13CEX2782AB
3
6-16
Summary of Contents for CX75C SR
