6921413
24
SERVICE
8
Tap the worm and bearing assembly out through the
end cover side of the housing. Remove the opposite
outer bearing race through the motor side of the
housing.
9
Press the pinion gear, seal, pinion bearings and worm
gear out of the housing.
10
Remove the snap ring from the pinion gear shaft. Press
the pinion gear bearing from the worm ring gear and
cover plate pinion bearing. Remove the pinion shaft key.
11
Press the pinion gear out of the housing pinion bearing.
12
Clean and inspect all components. Remove all dried
sealant residue. Replace all worn items. Remove any
burrs or sharp edged with emery cloth.
RC0173.eps
RR0522.eps
RC2111.eps
Bearing Outer Race
Worm Gear
Housing Pinion Bearing
Pinion Gear
Seal (if equipped)
Pinion Shaft Key
8
9
10
11
4.4-2
Drive Group –
Disassembly and Service
(Continued)
Summary of Contents for 14J Series
Page 2: ...BLANK...
