Casablanca Prestige, User Manual

Page: 2 / 88

The following product named "Casablanca Prestige" carries the CE seal of conformity on the basis of the guidelines 89/336/EWG of the
Commission of the European Community from 29. April 1991 for the alignment of legal regulations in the signatory states concerning
communications devices, including mutual recognition of their conformity.
This digital video editing system is meant for use with hard-drives carrying the CE seal of conformity. The product "Casablanca Prestige"
described here fulfills the requirements for a CE seal of conformity.
• Interference immunity according to EN 55024: 1998
Information technology devices interference immunity limits and quality testing
• Radio interference suppression according to EN 55022 class A 1998 Class A
Information technology devices radio interference properties limits and measurement procedures
• Electrical safety according to EN 60950: 2000
Safety of information technology devices including electrical office machines
This device is designed for use in industry. Interference immunity and interference emission conform to guidelines for industrial devices.
When used in living and business areas interference with other devices (e.g. radio) may occur. The operator is responsible at his or her own
cost to ensure that no third party is affected by possible interference.
This statement is given in responsibility for the manufacturer: MacroSystem Digital Video AG, Schöllinger Feld 28, 58300 Wetter, Germany
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at her/his own expense.
Remarks on Safety
This device conforms to the relevant safety regulations for computer equipment, including electrical office machines for industry. In case you
are in doubt as to permission regarding setup in the intended surroundings, please contact your dealer or our service department.
• Transport the device only in the original packing or in other appropriate packing that guarantees protection against sudden movements or
impacts.
• Condensation may result if the device is set up for operation after having been in colder surroundings. You should wait about 2 hours to let
the device become dry and attain the temperature of the operating location.
• Read the notes below "Location Environment" when setting up and before operating the device.
• Check that the operating voltage indicated on the type label is the same as the power outlet.
• This device is equipped with a safety-approved power cable and may only be connected to a grounded shockproof socket.
• The ON/OFF switch does not electrically separate the device from power. For complete separation from power the power cable must be
pulled from the power outlet socket.
• Make sure that the power connector on the machine and the room shockproof socket are easily accessible.
• Place the power cables so that they are not a danger (tripping) and will not be damaged.
• Data lines must not remain connected during electrical storms.
• In emergencies (e.g. damaged casing, operating elements, or power line, liquid poured on the device, or foreign substances) you must turn
off the device immediately, pull the power plug, and contact your dealer or our service department.
• Only qualified and authorized personnel may repair the device. Unauthorized opening and improper repairs can mean real danger for the
user. In such cases the guarantee is no longer valid.
• Install only system extensions that conform to the requirements and rules for safety, electromagnetic interference, and telecommunications
end devices. Installing other extensions may violate these requirements and rules, or damage the system. Your dealer or our service depart-
ment can tell you which system extensions are allowed.
• The unit contains a Lithium battery. It may only be removed or exchanged by authorized personnel. Incorrectly replacing the battery may
lead to the battery exploding. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of
used battery according to the manufacture‘s instructions.
Location Environment
Make sure that there is sufficient circulation of the air in order to prevent thermal buildup. Do not cover up the machine. If you mount the
machine in a rack make sure that sufficient air circulation is guaranteed. Do not set up the machine on carpeting, blankets, or the like. Do
not set up the machine near curtains, etc., because this entails the danger of blocking the ventilation ducts on the machine. Do not set up
the machine near heating or the like, and not in locations that are overly dusty, affected by direct sunlight, mechanical vibrations, or where
the machine can be knocked. The machine should be in a horizontal position when being operated. Do not set up the machine on an incline.
Keep the machine at a distance from devices that emit a strong magnetic field (microwave ovens, large loudspeakers). Make sure that the
machine is operated at a location temperature of 10 to 25° centigrade. The location must be dry. Air humidity must not be more than 80% and
must not be condensing.