CAS CL series User Manual Download

Page: 91 / 199

2.11.7 List Customer (Menu code 1422)

( MENU

→

4. Store Data Table

→

2. Customer

→

2. List )

This Menu allows you to list the Customer No.'s on the screen or print them out for
your records.

1. Set the list range

• Set the list range to check

EX) Customer No.’s 1~10

• Press Print Key to List Customer No.'s on
screen.

After Customer No.'s are listed on the
screen, pressing the TEST key will print
the Customer No.'s.

Note: Printing should be done on continuous
label stock.

2.11.8 Delete Customer (Menu code 1423)

( MENU

→

4. Store Data Table

→

2. Customer

→

3. Delete )

This Menu allows you to Delete a Customer from the file.

1. Enter customer to delete

EX) Delete customer N0.=1

Note: There is no confirmation request when
deleting a Customer No. Pressing the PRINT
key will cause the Customer No. entered to be
deleted.

Summary of Contents for CL series








































































































































































































Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands

CAS CL series, User Manual

Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands