CAS CL series User Manual Download

Page: 181 / 199

182

PLU Connection

3.19.1 Referenced PLU Function

If you press REFERENCE key after calling up a PLU which has reference
information, reference will be shown on the display.

◆

To use this function, you have to set reference department and reference

PLU when you create PLU.

3.19.2 Coupled PLU Function

Automatically coupled PLU is called up after transaction.
You can use this function when you sell two or more items as package.

◆

To use this function, you have to set reference department and reference

PLU when you create PLU.

Sales Operation Control Parameters

3.20.1 Fixed Weight

- You can set fixed weight when you create PLU

If you call up this PLU, the weight is not changed.

- You can use IN WEIGHT key.

Call up a PLU and enter a fixed weight by using OVERRIDE key and
press IN WEIGHT key.

3.20.2 Prepack Without Report

The transaction data is not added to report while using prepack mode.

- You have to set Parameter 597(Prepack report) to use this function. Also,

Parameter 596 should be set to Y

Summary of Contents for CL series








































































































































































































Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands

CAS CL series, User Manual

Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands