CAS CL series Page 159 User Manual Download

Page: 159 / 199

160

Place items on the platter. In this example the

Discount (Unit Price - $1.00) is available because

the weight of the items (1.07 lbs.) is greater than
the 2nd Discount Target (1.00 lbs.)

Press the PRINT Key. The Discount is
shown by the markdown (strikethrough)
of the Unit Price on the label. Refer to figure.

Note:

- You can select whether to print both the Original and Discounted Information

using Menu 1720 (chapter 2.13.3)

If you set Display Discount Info to a Y in Menu 1871 (chapter 2.14.21) you will
be able to see Total Price and Discount Information in the Display.

3.7.2 % Unit Price Discount - By Weight PLU

To call up a PLU enter the PLU Number and press the PLU Key. You may also call up
a PLU by using the Speed Keys. (refer to chapter 3.4)

Ex.)

PLU No.: 29

Press 29 PLU or

Press Speed Key

• 1st Target of Discount: Discount Unit Price 10% for a weight > or = to .5 lbs.
• 2nd Target of Discount: Discount Unit Price 20% for a weight > or = to 1.00 lbs.

Summary of Contents for CL series








































































































































































































Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands

CAS CL series, User Manual

Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands