CAS CL series Page 42 User Manual Download

Page: 42 / 199

2.1.4 Editing PLU (Menu code 1120)

( MENU

→

1. PLU

→

2. New/Edit )

◆

You can call up existing PLU information for edit.

2.1.5 Sample Printing (Menu code 1170)

( MENU

→

1. PLU

→

7. Sample Printing )

• Used to enable printing a sample PLU label.

EX) If set to Yes, when editing an existing PLU or creating a new one, depressing

the SAVE key will result in a label being printed with that PLU's information on it.

2.1.6 Listing PLU (Menu code 1150)

( MENU

→

1. PLU

→

5. List )

Note: Finding PLU; You need to know department # and PLU #.

1. Enter Department No.

• Enter department number that you wish to

see

EX) Department No. 1

2. Enter PLU Range

EX) PLU 1~10

• Press Print Key to List PLU's on screen.

After PLU's are listed on the screen pressing
the TEST key will print the PLU's.

Note: Printing should be done on continuous

label stock.

Summary of Contents for CL series








































































































































































































Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands

CAS CL series, User Manual

Search results

Summary of Contents for CL series

Reviews:

Related manuals for CL series

Brands by name

Popular brands