CAS CI-6000A Series, Manual

Page: 33 / 74

34
F33
FUNCTION : Output Mode of COM1 (RS-232)
DISPLAY DESCRIPTION
F33 0 No data output
F33 1 Stream mode
F33 2
Transmit one time only in stable condition after
Unloading to zero
F33 3
Transmit when data is required
* Signal : device ID (F31 : Device ID)
Set value
( 0 ~ 4 )
F33 4 Command Mode
Note 1. in the case of F33=3, if the Device ID is “01”, send to the “01” in the hexa mode in the
RS232C Simulator or “ALT”+”1” in the Hyper Terminal.
Note 1 : COM 1 : F33 = 4, COM2 : F35 = 1, F36 = 4 Command Mode
Command to CI-6000A
0 1 2 3 4 5 6 7 8 9 10 11
Command
description
Indicator to PC
D ID K Z CR LF ZERO key Return the received
D ID K T CR LF TARE key Return the received
D ID K G CR LF GROSS key Return the received
D ID K N CR LF NET key Return the received
D ID K S CR LF START key Return the received
D ID K P CR LF STOP key Return the received
D ID K B CR LF Print key Return the received
D ID K C CR LF Total print key Return the received
D ID K W CR LF Request weight data Return the received
D ID H T CR LF Request set-point SEND Format 2
D ID H Z 0 0 0 0 0 CR LF Zero band Return the received
D ID H O 0 0 0 0 0 CR LF Optional pre. Return the received
D ID H P 0 0 0 0 0 CR LF Preliminary Return the received
D ID H F 0 0 0 0 0 CR LF Final weight Return the received
D ID H R 0 0 0 0 0 CR LF Free fall weight Return the received
D ID H I 0 0 0 0 0 CR LF High limit weight Return the received
D ID H L 0 0 0 0 0 CR LF Low limit weight Return the received
D ID H E 0 0 0 0 0 CR LF Set-point code Return the received
D ID S T CR LF Set Mode Value SEND Format 4