67
5.4 Printhead Check (CHESS)
5.5 Trans Mode
The CHESS function allows you to check the condition of the thermal print head. This test
produces several different print patterns that allow you to determine if there are any burned
out or shorted dots on the printhead.
PRT/*
PRT/*
1
PRT/*
2
PRT/*
3
PRT/*
4
PRT/*
5
1) To go to the ACCOUNT mode, press the number 2 key and then the MODE key.
2) Press the
twice and the display shows “CHESS”.
$
3) Press the PRT/* key and the display shows “CHESS tYPE 1”.
4) Enter the CHESS type number you wish to print and press the PRT/* key. The
scale will issue a label. Compare the printed label to the sample labels to determine
the condition of your printhead.
5) To go back to the CHESS Main Menu press the C key. To exit the ACCOUNT mode press the
C key twice.)
PRT/*
The Trans Mode function allows you to transfer the file in one scale into another. To perform this function
you will need a 25 pin to 25 pin crossover cable (part# J11) to connect the scales.
3) Press the
three times and the display shows “trAnS”.
$
4) Press the PRT/* key on the scale with “trAnS” in the weight display.
5) The data file will be transferred.
6) To exit the ACCOUNT mode press the C key.
2) On the scale
the data file programmed in it, go to the ACCOUNT Mode by pressing the
number 2 key and then the MODE key.
without
1) Connect the scales together using the 25 pin to 25 pin crossover cable. Power on both scales.
The scales will both come up in the Sale Mode.
The scale with the data file programmed in it
must remain in the Sale Mode. Also make sure the baud rate is the same in both scales. (SET #9)
On the empty scale
On the Scale with data
