PRT/*
PRT/*
(0 ~ 99)
Ex) “77” as gCode
7
7
PRT/*
PRT/*
Don’t save current PLU
Erase current PLU
PRT/*
1) To go to PROGRAM mode, press the number 1 key then the MODE key.
2) The display shows: “PLU”.
3) Press PRT/* key. The display shows “PLUno 4000”.
The number in the UNIT PRICE display indicates the amount of empty PLU’s ready to be programmed.
4) Type a PLU number you wish to program. Remember, this number must be between 1 and 4000.
5) Press PRT/* key. The display shows “iCodE”. Press PRT/* key. (If you do not wish to program an item
code, press the
key) The display shows “iCodE EntEr 0”.
i
6) Type the item code number. The item code can be from 1 to 999999. If you enter 0, the item code will not
be printed on the label. (This number is used by the scanning device to reference the PLU.
In most cases, the item code is programmed to be the same as the PLU number.)
Press the PRT/* key when you’re done.
7) The display shows “nAME” (The name field is composed of 2 lines of text. Each line can contain up to
If you want to type the second line of text, press the ENTER key. (To skip the second line, press PRT/* key.)
28 characters and spaces. Name is commonly referred to as commodity name.)
8) Press the PRT/* key. (If you do not wish to program name, press the
key). The display shows
i
“nAME 01.01”. The numbers in the UNIT PRICE display represent the line number and character number
on which your cursor is located. The number to the left of the decimal is the line number you are on (01 or 02).
The number to the right is the number of the character position on which you are about to type (01 to 28)
9) Now type in the first line of text using the Alphanumeric keypad on the left side.
23
