4.9 PASS (Password function)
You can protect the programming mode functions by using a password. The password must be at
least 4 numbers long with a maximum of 6 numbers allowed.
(Only numbers may be used.)
Note: The PASS function must be enabled in the CAL 4 mode.
1) To go to PROGRAM mode, press the number 1 key then the MODE key.
1) To go to PROGRAM mode, press the number 1 key then the MODE key.
2) Press
key seven times.
2) Display will show “PASS EntEr -”
3) Enter the password. Total Price display will show dashes for each number entered.
4) Press the PRT/* key. Display will show “PLU”
5) To return to the Weigh Mode, press the C key.
3) The WEIGHT display shows “PASS”.
4) Press the PRT/*key and the display shows “PASS -
-”
5) Enter the desired password using the numeric key pad. (minimum 4, maximum 6 digits)
7) Press the PRT/* key.
8) Display will show “PASS”
9) To exit the PROGRAM mode, press the C key.
6) The display will show “PASS
-
------” (dashes in Total Price display correspond to the
number of digits entered for the password).
60
1
PRT/*
2
4
3
5
6
Enter Password
Enter Password
PRT/*
( min 4, max 6 digits)
( min 4, max 6 digits)
Programming the Password
Using the Password
1
PRT/*
2
4
3
5
6
Enter Password
Enter Password
1
MODE