10) The display shows “nAME 02.01”. Type in the second line of name.
11) Press the PRT/* key.
12) The display shows “MSGno”.
13) Press the PRT/* key. (If you do not wish to program the Message No., please press
key).
i
The display shows “MSGno EntEr”
Press the PRT/* key when finished.
14) Type the Message Number using the Numeric keypad. The Message Number can be from 0 to 1000.
15) The display shows “PriCE”.
The display shows “PriCE EntEr 0.00”.
16) Press the PRT/* key. (If you do not wish to program the Price, please press
key).
i
If you wish to finish PLU programming, press the C key.
17) Type the Price amount using the Numeric keypad. The price can be from 0 to 999999.
Press the PRT/* key when finished.
18) The display shows “LiFE”. (The number in this field will represent the amount of days this
commodity should be sold by. It can be from 0 to 999 days).
19) Press the PRT/* key. (If you do not wish to program the Shelf Life, please press
key).
i
The display shows “LiFE EntEr 0”. Type the Shelf Life using the Numeric keypad.
The Shelf Life can be from 0 to 999 which represents the number of days after the Packed On Date.
This is how the Sell By Date is calculated:
+
=
.
Packed On Date
Shelf Life
Sell By Date
20) Press the PRT/* key.
21) The display shows “tArE”. (Tare is used to store the weight of the container to be used with this PLU.
The Tare is subtracted from the Gross Weight of the item at the time of weighing).
22) Press the PRT/* key. (If you do not want a Tare, please press
key). The display shows “ tArE EntEr 0.00”
i
Type the Tare value you want using the Numeric keypad. Press the PRT/* key.
23) The display shows “GCodE”. (The Group Code is a number from 0 to 99 that is printed on the label.
It can be used to group PLU’s into sections. For example: all beef PLU’s are Group Code 10, all poultry
PLU’s are Group Code 20, etc.).
24) Press the PRT/* key. (If you do not want to enter a Group Code, press
key). The display shows
i
“GCodE EntEr 0”. Type the Group Code number you want using the Numeric keypad. Press the PRT/* key.
25) The display shows “SAvE”. If you want to save this PLU to memory, press the PRT/* key.
The display shows “PLU”. (If you do not want to save this PLU to memory, press
key and the display
i
shows “ESC”. Press the PRT/* key to exit without saving this PLU.
26) If you wish to program another PLU, go back to Step 2.
24
