SETUP MENU
54
TO SET AUTO INPUT SEEK
1.
Please follow steps 1 through 3 from the “to set password” instruction above to reach
the “ADVANCED SETTINGS” menu.
2.
Press the
button on the remote until you reach “Auto Input Seek” on the front panel
display.
The “ADVANCED SETTINGS / AUTO INPUT SEEK…Off” menu appears on the front panel
display.
3.
Use the
and
buttons on the remote to select the auto input detect to either “ON”
or “OFF”. When you select “ON”, the Cinema 11a can automatically detect input sources.
TO SET LATE MODE FOR DOLBY DIGITAL
1.
Please follow steps 1 through 3 from the “to set password” instruction above to reach
the “ADVANCED SETTINGS” menu.
2.
Press the
button on the remote until you reach “LATE” on the front panel display.
3.
Use the
and
buttons on the remote to select the LATE mode to either “Off”,
“Half” or “Full”.
Note:
The “LATE” feature only operates with a Dolby Digital or Dolby Digital EX source
with one of these mode being active. This feature allows you to set the of Dynamic
Range Compression to 50% when the LATE mode of the Cinema 11a is set to “Half” and
100% of Dynamic Range Compression when the LATE mode is set to “Full”. This mode
can also be selected by pressing the LATE button on the remote control.
This feature makes the softer sounds of a movie louder and the louder sounds softer,
reducing the overall dynamic range. You will notice that the vocal dialogue is easy to
understand in this mode, even when playing quietly. This mode is useful when you wish
to watch a movie in surround sound when you do not wish to bother others by the level
of the volume.
TO SET RESTORE DEFAULT
1.
Please follow steps 1 through 3 from the “to set password” instruction above to reach
the “ADVANCED SETTINGS” menu.
2.
Press the
button on the remote until you reach “Restore Default” on the front panel
display.
3.
Press the ENTER button on the remote to run the “Restore Default” system restore.
NOTE:
When the processor is reset, you will lose all of your settings.
When you are finished with the reset, the following will appear on the display:
Restore Default OK
