SETUP MENU
46
next station, one after another, beginning with the current station, for approximately five
seconds each. Station frequencies will be assigned to station numbers in the memory.
Manual tuning
To change the frequency one step at a time, press TUNER SEEK.
3.
Saving station presets
If you often listen to a particular radio station, it's convenient to have the processor store
the frequency for easy recall whenever you decide to listen to that station. This saves the
effort of manually tuning in each time. This processor can memorize up to 99 stations.
Tune to a station you want to memorize.
Press the MEMORY button on the remote and the front panel display will show: SAVE P00?
Using the numerical keypad section at the top of the remote, press one of the NUMBER
buttons to assign the station preset. For saving stations to selections 1 through 9, you will
need to enter them as 01, 02, 03 etc. The Cinema 11a will automatically save the station.
4.
Improving FM stereo sound
If the TUNED or STEREO indicators do not light when tuning to an FM station due to a
weak signal, press the FM MODE button to switch the processor into mono reception mode.
This should improve the sound quality and allow you to enjoy the broadcast. An outside
antennae or a cable FM connection will improve reception.
5.
Listening to station presets
After setting your preset radio stations, (see saving station presets above if you haven't
done this already) press AM or FM to select the band. Press the number on the remote
control to recall the station preset.
