SETUP MENU
52
8.
Press the
button on the remote to reach “BACK” then press the ENTER button to
return to the “EDIT CUSTOM NAME” menu, or simply press the SETUP button to exit the
“SETUP MENU” completely.
TO SET INFRARED REMOTE CONTROLS
To set IR Controls:
If you select ‘rear,’ the front will ignore infrared remote commands. Use the front panel buttons
to make changes in the case.
1.
Please follow steps 1 through 3 from the “to set password” instruction above to reach
the “ADVANCED SETTINGS” menu.
2.
Press the
button on the remote until you reach “IR Controls” on the front panel
display.
The “ADVANCED SETTINGS / IR CONTROLS….Front” menu appears on the front panel
display.
3.
Use the
and
buttons on the remote to select “FRONT” mode, “REAR” mode or
“BOTH” mode. When you select “FRONT” mode, the Cinema 11a uses the front panel IR
sensor to accept IR signals from your remote. When you select “REAR” mode, the
Cinema 11a's front panel remote sensor will not accept IR controls from your remote.
You will need an optional IR remote control sensor connected to one of the back panel
IR inputs. When you select “BOTH” mode, the remote sensor uses the front panel IR
sensor and optional remote control sensor. Regardless of the IR setting within the
Cinema 11a, you may always use the front panel controls to access and control the unit.
To set Zone 2 IR Controls:
If you select ‘rear,’ the front will ignore infrared remote commands. Use the front panel buttons
to make changes in the case.
4.
Press the
button on the remote to reach “ZONE2 IR Ctrls” on the front panel display.
The “ADVANCED SETTINGS / ZONE2 IR CTRLS Front” menu appears on the front panel
display.
5.
Use the
and
buttons on the remote to select “FRONT” mode, “REAR” mode or
“BOTH” mode. When you select “FRONT” mode, the Cinema 11a uses the front panel IR
sensor to accept IR signals from your remote. When you select “REAR” mode, the
Cinema 11a's front panel remote sensor will not accept IR controls from your remote.
You will need an optional IR remote control sensor connected to one of the back panel
IR inputs. When you select “BOTH” mode, the remote sensor uses the front panel IR
sensor and optional remote control sensor. Regardless of the IR setting within the
Cinema 11a, you may always use the front panel controls to access and control the unit.
To set Zone 1 Rear IR Mode:
The setting selects the polarity of the Zone 1 rear IR sensor. When you select NORMAL, the
Polarity is positive. When you select INVERT, the Polarity is negative.
