manualshive.com logo in svg

Cary Audio Design HD Surround Sound Processor Cinema 11a, Owner'S Manual

Share
Download
Cary Audio Design HD Surround Sound Processor Cinema 11a Owner'S Manual Download Page 40

SETUP MENU 

 

 

39

SET SPEAKER PHASE  

 

The Cinema 11a's SET SPEAKER PHASE feature uses phase correction measures to make sure 
your sound source arrives at the listening position in phase, preventing unwanted distortion 

and/or coloring of the sound. 

 

SET SPEAKER PHASE technology provides coherent sound reproduction through the use of phase 

matching for an optimal sound image at your listening position. 

 

Setting the speaker phase manually 

If you have already completed the Auto Sound SETUP, press ENTER to return to the SETUP 

MENU. If you want to adjust your settings manually, you can use the SET SPEAKER PHASE menu 

option, following the directions below. 

 

NOTE: The following selected menus appear on the Cinema 11a Display. 
 

MOVIE SPK Setting 

Set Speaker Phase 

 
 

To set the Speaker Phase manually: 

 

1.

 

Press the SETUP button on the remote to enter the “SETUP MENU”. 

The “SETUP MENU / LISTENING PROFILES” menu appears on the front panel display. 
 

2.

 

Press the ENTER button on the remote to enter the “LISTENING PROFILES” setup menu. 

The “LISTENING PROFILES / MOVIE MODE” menu appears on the front panel display. 

 

3.

 

Press the ENTER button on the remote to enter the MOVIE MODE “Set Speaker Config” 

settings menu.  

           The “MOVIE SPK Setting / Set Speaker Config” menu appears on the front panel display. 

 

4.

 

Press the 

 

button on the remote until you reach “SET SPEAKER PHASE” on the front 

panel display. 

The “MOVIE SPK Setting / Set Speaker Phase” menu appears on the front panel display. 
 

5.

 

Press the ENTER button on the remote to enter the “SET SPEAKER PHASE” setup menu. 

The “Set Speaker Phase / FL Speaker …..In/Out Phase” menu appears on the front panel 

display. 

 

6.

 

Use the 

 and 

 buttons on the remote to adjust the phase. 

You can adjust each channel’s speaker to be “IN” phase or “OUT” of phase. 

 

7.

 

When you have finished setting the phase for all of the speakers within your system, 
press the 

 

button on the remote to select BACK, then press ENTER to return to the 

previous “SETUP MENU” to continue through the system setup process, or simply press 

the SETUP button to exit the “SETUP MENU” completely. 

 

 

 

 
 

Summary of Contents for HD Surround Sound Processor Cinema 11a




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands